-
Overview The Threats Grid for Impact displays the impacts of the Objectives or sub-objectives. By default, the grid shows the objectives' impacts due to the overall Objective. Objectives Grid for the Overall Sources Impacts
By s...
-
Depending on the settings made by the Project Manager, the Step Function graph and the resulting likelihood or impact may vary depending on whether the Piecewise Linear option is enabled or not. The graph below shows the Step Function when the Piec...
-
On this page, you can define the measurement method to use when evaluating the Controls for Event Vulnerabilities (by Control). This is found on CONTROLS > Measure > Measurement Methods > f or Controls for EVent Vulnerabilities (by Control ) . ...
-
Last Updated: 05/03/2021
in Risks Risk Map Overview Risk Map is a graphical visualization of the events' risks designed to illustrate the likelihood of events on one axis and the impact of events on the other. Here we see the Risk Map for the Likelihoods, Impacts, and Risks of...
-
The Mixed screen for Impact displays the sensitivities and grids into one view: Dynamic Analysis Performance Analysis Gradient 2D plot Head to Head Events Grid Objectives Grid By default, four sensitivities are displayed a...
-
Last Updated: 04/20/2021
in Controls Identify Controls for Events Vulnerabilities can be viewed, added, and assigned to this page. Here the controls are being assigned to one selected event given the threats/sources. From the grid above, you can assign the potential controls to mitigate ...
-
Sensitivity ∆ (delta) Events page for Impact shows the changes in overall event impacts when the event impact due to one or more covering objectives is changed. If you change an event's impact given a single objective, you'll see the effect on the e...
-
The Project Manager decides the navigation options available during the evaluation. By default, the navigation box, and buttons can be available at the bottom of each of the evaluation steps. (Note: A button can be disabled if not applicable to t...
-
After having selected participants to evaluate the model and assigning them roles to evaluate threats, objectives, and/or events, you can invite the participants into TeamTime Evaluation. Depending on the model you are working on, you can sele...
-
Overview This page displays a similar diagram as with the Overall Bow-tie Diagram (without controls) -- but on this page, the likelihoods, impacts, and risks are calculated with controls in effect. Controls can also be viewed, selected/deselect...